Rotary Owners' Club

I have recived the vehicle pass's any up for going, you get a person pass when you put the bike in the building. if you are interested let me know asap please.Regards Wayne

Hi RichardThanks for your comment Richard now you, andover and graham know no why i have been badgering for scrap parts, the big thing i am missing is a damaged beond use mollyed end plate or intermidiate plate. i have a cracked fresh molyed air coolrd left hand plate bur would need to replace it wi...

hi paulunfortunatly its too far for me to travel, i am risrticting my self to a 3 hr drive as i have to put everything to bed when i get home. i had a rotor mounted on a single rotor shaft with a aro end plate and comander housing it was very popular, the unit worked better when i added a bit of rot...

http://i222.photobucket.com/albums/dd279/myfordwayne/A7139199_zpsa9db6ebd.jpg the club stand http://i222.photobucket.com/albums/dd279/myfordwayne/A7139193_zps05e98469.jpg No introduction should be nessasary for eithere of these legends http://i222.photobucket.com/albums/dd279/myfordwayne/A7139176_z...

Hi Ihope malc gets well i was taling about his racing days on the interplods only this weekend, i whish he could have been at mallory himselfRegards wayne

can any one scan me a duckhans norton sticker at a high resolution, its for the dicription sheets for my duckhams stuffregards wayne

dave i have sent you a pm relating to the club standRegards Wayne

Hi allIt appears not Mitch interest in this, the works bikes will be there and Michelle Dunlop will be on one along with Trevor. Dave Hickman tells me he's going and will pop in to the stand. I have 7 confirmed bikes. If any one ells goes drop in and make your self knownRegards Wayne

Hi allI have purchased a 6x3 and 3x3m awnings for display purposes I am after a coupe of full size male dummy's for the stand. They need to be cheap and post able all the suitable ones on eBay are miles away and collection only.If any one has anything interesting I am always on the look out. I would...

Hi all Some one has been after info on extractor exhausts and rang me during working hours left no number but a email address I can't make out. If a member is this person ring me after 7 pm, my computers goosed at the moment so email would be no good anywayRegards Wayne

The stand is verbaly confirmed and will be in the race paddock. I (we) can purchase 6 extra Tickets for entery as a spectator for £25 wivh is under a £5 each if any one from the club wishes to attend as a spectator, Note You wont get into the paddock with your bike. I may be able to squees 2 more bi...

pm me your email and i will send you a works sketch of a 87 extractor, for the correct race power you need ported housings, 1-1/2 inlets the correct length and timing was 25 degrees with a flywheel thined down to 7mm. the spark plugs were also droped lower. 9 to 1 rotors minimum. Twin plug aro race ...

Hi Allif anyone wants to attend as part of the club i need to know by the 22 of may to book the club stand and number of bikes. entery to the event will be free, as it stands track time is payerble.See www.malloryparkcircuit.com for info about the event.Regards Wayne

Mallory Park Bike Bonanza 11 to the 13th of july. I was talking to Stuart Hicking about putting a rotary owners club stand on Sat road bikes on track, Sunday Race bikes on track, The National Museum are sponcering so i presume the museums rotarys will be there. Trevors confirmed. i need to ring him ...

Hi RichardMy brand new commander clutch drum £50 and F1 clutch drum £150 from Graham, these items were new and looked new as well. Reasnoble cost.Regards Wayne

Hi allI think graham is running very low on decent second hand commander/interpol spiders (thats what i call them) but is always worth checking. I borrowed a ex norton tool to do my clutch cush drive rubbers, and thought B"""""s to that idea i made a tool that fits in the vi...

Hi all http://i222.photobucket.com/albums/dd279/myfordwayne/A8108363_zpsc0c7d891.jpg the vjmc have asked us to do a club stand again, i have confirmed my 5 bikes however it would be nice for a commander, classic or interpol 2 or even a special to be there. if you would like to atend just drop me a l...

Hi Daviddid you get my £Regards Wayne

Hi AllI renewd my membership online did the club get my £Regards Wayne

Gahams digital ignition will replace the boyer, however the retard curve will be differant to the boyer so tick over will need adjusting.Andver Nortons Digital ignition is not a straight forward swap, coils, pickup must also be swapedRing Graham at Startright, Andover can be contacted either by phon...

Hi All The following link may be of interest relating to f1 prototypes its p55003 acording to the reg in 1989Non std exhaust, swinging arm std spondon type for 89, forks baseds on 88/89 race forks but well modified, spondon handelbars.I am sure Richard can add to the Non production stuff http://www....

Hi allthere are 15 of us acording to the roc mag so should be possible, i wonder howmany rotary bikes we have between us, i recon 25+Regards wayne

Hi AllMery christmas to all the roc members.Santa managed to find me a set of 1990 wp usd race forks?Regards Wayne

Hi AllAndy has now sold this f1.Regards Wayne

Hi AllEvery year it seams have to clean my non return valve with carb cleaner to stop it weeping.Regards Wayne

Hi alljust had a look at the pics the right hand endplate is not race shop and it looks like the serial number boss has not been machined either.To the new owner i would get the componants checked by richard, i bought somthing similar 3 years a go it had been a factory dummy engine and half of the c...

Hi AllAny one who did not like a f1, did not ride it hard enough, easily tested when you stopped did you have oil dripping on to the collector box, no, you were pottering about?I had a jota before many of the irritations were overcome, defiantly more of a headache than a f1, in the day i remember th...

Ring startrights but not Mondays as it's Graham's day off

Opening the throttle should almost imidatly switch the carbs to fuel direct from the pump not header tank. The setting for the miro switch is a couple of mm from memory is set by measurement not rpm.Also when you open the throttle with the ignition on but the engine not running dose your fuel pump s...

hi allI had a problem with my f1 not ticking over after a few minuits it would dye similar to how derick discribed, i tried new ignitions no difrance, evan a brand new set of carbs no diferance, i noticed if i took all the bodywork off and it would tick over reliaby, then it hapend the ballast resit...