Rotary Owners' Club

hi DaveI would not let a petrol tap beat you, in my experiance the hadrer somthing is to solve the greater the satisfaction when you sort itRegards Wayne

Hi Daveby all means, i will be in the road paddock hopfuly on the hard standing by the foot bridge as beforeRegards wayne

Hi AllI have contacted the vmcc and all for the 1000 bikes all road and race slots are full and official individual displays are not allowed, I cannot apply to do a club display this must come from the chairman or secretary of the club, (which I suspected would be the case and why i asked for suppor...

Hi AllHas any one used or know of a supply of single row self aligneing bearings, these are used in aircraft industry. These bearings are also used on race headstocks with off set bearing cups, on the race Nortons between 87-90 and 92-94, my harris frame has standard centerd bearing cups. I have see...

Hi arrenI realised you are not mr garner, however the point i was making is, do you require the engine for his nrv588 without an engine. A lot of people have stuff out there, 9 times out of 10 you have to justify why you want the stuff as most was bought for a project or as spares for there main bik...

Dyslexia strikes again should have read "not a cat fight", my apologies Regards Wayne

Hi Richardmy comment was to head turtle is intended as cat fight and not conected to andy whats so ever, just stating some of the componants are of no use on the Nrv but very useful for f1 owners rather than sat in donington gathering dust, forgot the water pump off the above listRegards Wayne

Thanks RichardRegards Wayne

Hi HeadturtleHeard on the grapevine that you (Mr Garner) reqire the f1 engine for the nrv588 without an engine? if this is correct quite a few useful spairs would be of no use 9 to 1 rotors, posibly stationary gears as they are matched to the rotors, full primary drive and startermotor, outer covers...

Hi RichardHave you added me to the listRegards Wayne

hi richardCan bring the black sport and help out on the stand just let me know the details or what i need to doRegards Wayne

Hi Dave and everyone ellsI have requested permission to display in the race paddock, if granted Mark and Paul will show their Rcw bikes along side my race bikes in there current state at the time to show people what’s involved in returning one of these bikes back to original or replica as well as op...

Hi AllThe Vmcc have confirmed my enterys to the festival of a thousand bikes for the road bikes but not the display i offered, Mark and Paul also indicated they would also display there Rcw's as well. If the do agree i would be happy to display any Roc banners, the trailer dose have a fair size horn...

Hi allThats a resnoble price, thanks for the link very usefullEbc made Mark a rear disk for his Rcw he had to send them his rear wheel? However Ebc catolog on the website lists F1 front disk as Md684 F1 rear disk Md816 commander front disk Md2011 rear disk Md2069. Doulble check with your EBC supplie...

Hinote theres a big misconception on the F1 its the rotors that wear more than the bobins causing the problems. Second at what point is acepterble wear and mot failure, ist the bacward and forward movment the side to side can be spring loaded also stops the disk rattling as mutch.With fauthought if ...

Hi To my knoledge, there is not a direct replacement, Richard or Graham are the best people to comment, there are a few main factors rotor boss mounting hole diamiter, pcd of the bolts for the rotor, number of bolts and diamiter, offset of the disk rotor, disk thicknes, overall diamiter of the disk....

hi what info do you want to know, NML apperd to have one compleat new disk left, its normaly the disk rotor that wears, The disks are brembo as are the rotors.Note the Nrs racing pvm wheel and disks are different and will not fit the f1 pvm wheel nor will the f1 disks fit the nrs pvm wheel{i tried b...

Hi allAs i suspeted there is another Rc588 in private ownership, this takes up all the six frames made up to april 88, however there may have been some more 300 series frames made after mine in 88 untill the 400 series rcw frames were made by spondon for 89. Below is my 88 frame with mark simpsons t...

Hi allmy F1 and sport are booked for saterday, i also asked to put a bit of a display on in the race paddok, no reply yetRegards Wayne

Hi Andyi will be going but on the side car with my son, its better incase i discover any parts for my race projectsRegards Wayne

Hi AllCan any one tell me how many Rc588 are left in there origonal condition and who owns them, apart from the one in the museum. Brian C has informed me my spondon race frame was deliverd by spondon to norton in april 88 the 6th frame made for the race team, it had started life with the rc engine ...

what a dim wit i am, of course i was taling about the festival of a thousand bikes, the tralers got a horning on the side and i agree its good to get out of the sun.Mark Simpson was talking about gazebos, may be worth pm him, i will possibly be having a operation this year, untill i get a date i can...

Hi allI currently on the look out for a Commander engine or tatty compleat bike to use the engine for the spondon race chassis to get this progect moving. Pm me if you have somthing or know of one.Regards Wayne

Hi allI currently on the look out for a Commander engine or tatty compleat bike to use the engine for the spondon race chassis to get this progect moving. Pm me if you have somthing or know of one.Regards Wayne

Hi allGreat minds think alike, i was only talking to richard about this yesterday only with a commander or F1 engine, it could then double as mock engine for frame workI intended to port one housing to race spec (and to have an excuse to have a go at porting and opening up the inlet tract), just nee...

Hi all I am sending my entery of for both two of my f1 bikes and hope to take one of the race bikes as a static in progress. will be taking the trailer as last yearRegards Wayne

Hi allalan has asked me to post his phone number as he prefers this to emailsRegards Wayne

Hi Graham I need a f1 impeller if there the same for my nrs engine, i also need a second compleat f1 water pump compleat or just the housing if any one has one, for another f1 enginesRegards wa

Thanks DickYour work will be apreciated for years to come by commander ownersRegards Wayne

Hi allbe carfull about posting your email adresses pm people it safer, on the noc forum 4 people including me were subject to an atempted scam.ColinYour details have been fowarded to alan